generator F50 water DC water flow pump 5V 12V 0-80V hydroelectric generator 1.2Mpa water phase(SJB920-420A,DC 5V)

Pumpsgenerator F50 water DC water flow pump 5V 12V 0-80V hydroelectric generator 1.2Mpa water phasefeature:1. Stainless steel machine screws, choose better material.2. Low water pressure start, waterway design with low flow loss, low water pressure start (0.05mpa).3. Water-electricity separation, water-electricity separation technology + dual magnetic circuit coupling clutch.4. Enlarging the vortex impeller greatly improves the power generation efficiency, while increasing the bearings to reduce wear.5. The strong magnetism of quartz-iron-boron has greatly improved the power generation capacity.6. Four-point external thread: The water inlet and outlet adopt 4-point external thread with an outer diameter of about 20mm.Specification:Terminal: 2 pinsGenerator life: 3000hMechanical noise: 55dBAxial clearance: 0.2-1.0mmStarting water pressure: 0.05MpaLine resistance: 10.5±0.5Output peak voltage: 80V (1.2Mpa)Output peak current: 220mA (12V)Outlet closing peak pressure: 0.6MpaInsulation resistance: 10M (DC100)Peak pressure when water outlet is opened: 1.2MpaOutput characteristics: Without voltage stabilization circuit, the output voltage is proportional to the water pressureModel corresponds to power output type:5V: DC 5V regulated output, can charge mobile phones, and can also charge lithium batteries with charging management chips.12V: DC 12V regulated output, can power and charge 12V radios, and power LED lights.0-80V: DC 0-80V output, the generator has no voltage stabilization circuit, the peak voltage reaches 80V, it can directly charge 3-12V 10W LED lights, and can directly charge small batteries, the peak charging current is about 220mA, because the electricity generated during charging is used up in time, the voltage will automatically maintain at around 14V, maintaining a suitable voltage, so that all the generated electricity can be used to

• Pumps