| Management number | 211773399 | Release Date | 2026/04/04 | List Price | $36.00 | Model Number | 211773399 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
SpecificationsColor: BlackType: Electric Material: Steel, Aluminum, Copper, PlasticSurface Treatment: Plastic SprayingMotor: Permanent Magnet Model: P2000-4Voltage: 12VMotor Power: 0.3KW Gear Ratio: 465:1 Pulling Capacity: 2000LB Working Load: 2000LB Breaking Strength: 2400LBS Hook Size: 1/4 inchBattery Cable Length: 5m/16.4ft Wired Remote Control Cable Length: 3m/9.84ft Steel Wire Rope Size: Φ4.8mm*9.2m/0.19inch*30.18ft Product Size: 24.5*25.6*19.6cm/9.64*10.08*7.72inchPackage Size: 39.5*29.5*25cm/15.55*11.61*9.84inchNet Weight: 11kg/24.25lbsGross Weight: 12kg/26.45lbs Package Included1*Electric Winch1*Hand Crank1*Wired Remote Control1*Battery Cable1*Hanging Board 1*English ManualNotes1. Please make sure to add lubricating oil to the gears and shaft sleeves before use to prevent winch wear caused by an oil shortage.2. If you encounter a problem caused by the clutch not being tightened: 1) If the tension is too low, you cannot pull the boat. The machine will make the sound of gears falling off. 2) The marine winch will stop working regularly. 3) The cable will not be locked and the wires may slide out. 4) The winch may pull for a few seconds and then stop working. Please do not pull the boat directly after tightening the clutch. Please roll the cable in to release tension first. If this is not done, the winch can be restored to normal use.
| Manufacturer | YUNLAIGOTOP |
|---|
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form